LEAK STOPPER METAL ROOF SEALS

COATING APPLICATORS - DISTRIBUTORS - MANUFACTURES

Aluminum Kwik Seals & Tape

Is a self-adhering material featuring a heavy duty protected foil film surface and a highly aggressive water resistant butyl rubber adhesive.This tough film surface provides a puncture and UV resistant surface.The 20 mils of butyl prevents water from penetrating and seals tightly to most any surface.Great for Flashing, Valley's Roof Patch, Gutters all kinds leaking problems.

                  ALL PRO PAKS ARE AVAILIBLE IN POLY OR  ALUMINIUM                         

PRO-PAK METAL ROOF REPAIR KIT ALUMINIUM

This Handy Dispenser Pack is for larger jobs, easy to take up on a roof & contains enough material to repair & stop leaks  on approx. 2000 to 4000  Sq. Ft. of metal roof. This Kit contains 1 -  6"  roll of 2100 Seals
& 2 - 100 ft. rolls of 3" Seam Tape Application Tool/Roller.                               
ORDER # PPRK-3      COST $  CALL         
Size 14x7x7*              Weight 11 3/4  LBS.   

PRO-PAK LEAK STOPPER SEALS ALUMINIUM

This Handy Dispenser Pack is for the larger  job & easy to take up on a roof.
This Kit contains  2 - rolls of 2100   Seals each & Application Tool.

ORDER # PPLSS-2         COST $ CALL        Size 14X7X7        Weight 9 1/4  LBS.      

     
CASE OF 8 rolls of 2100 Seals each        

      COST $ CALL         ORDER #  PPLSS-8

PRO-PAK LEAK STOPPER TAPE ALUMINIUM

This Handy Dispenser Pack is for the larger job easy to take up on a roof.  This Kit contains 4 rolls of  3"   Seam Tape   400  ft.  total and  

                        Application Tool Roller.                        

ORDER # PPLST-3         COST $225.00       Size 14x7x7       Weight 14 1/2  LBS.  *                                                                

ORDER # PPLSS-1A      COST  $ CALL  Size 3" X 6"         WEIGHT 2 LBS.

ORDER #  PPLST-3-16    COST $    CALL  Size 14X14X13    WEIGHT 55 LBS.  

CASE OF  16  3" rolls 100 Ft.         

1600 Ft. PER CASE          

Poly Kwik Seals & Tape

Is a self-adhering material featuring DuPont Sontara* fabric which is made of wood pulp & spun polyester and a highly aggressive water resistant butyl rubber adhesive. This woven fabric is excellent at absorbing coatings and is the preferred method for coating manufactures  The 20 mils of butyl prevents water from penetrating and seals tightly to most any surface.

This material must be coated after application. and is the material used by major roof coating manufactures for

over 10 years with no failures

APPLICATION:

CLEAN SURFACE AREA THOUROUGHLY

Peel off release paper backing, pinch Seal in half to determine center, center on fastener head, flatten to original shape, center tool, push down hard, then twist. Presto! A customized water tight fastener Seal!

WE RECOMMEND PRIMING SEALS AND TAPE BEFORE FINAL COATING IS APPLIED

1 ROLL OF 3" SEAM TAPE

POLY COVERED MADE FOR ROOF COATING

ORDER # PPLSS-1S COST $ CALL 

Size 3" X 6" WEIGHT 1 LBS

.
 1 CASE OF 16 OF 3" SEAM TAPE

800 Ft. PER CASE

ORDER # PPLST-3-16 COST $ CALL

Size 14X14X13 WEIGHT 30 LBS

-----------------------------------------------------------------

KWIK-SEAL 

INSTALLATION TOOL

KKTW 3 " WOODEN DEMO TOOL COST $5.00

KKT1.5"   INSTALLATION TOOL COST $30.00 

This 28* tool quickly installs KWIK-SEAL fastener Seals.
Reducing stooping, bending & back fatigue.

KWIK-TITE

FASTENER TIGHTENING TOOL         
 

KKFT28   COST $30.00
 

28* Heavy duty roof fastener tool, equipped with a 3/8* head that will will fit all standard sockets. The soft handle stores spare sockets. This 28* extension tool quickly tightens fasteners, reducing stooping, bending & back fatigue.