PATCH HOLES & LEAKING SEAMS WITH KWIK-LEAK STOPPER™   FASTENER SEALS & SEAM TAPE

ACRYLIC, CERAMIC, & ELASTOMERIC ROOF COATING APPLICATORS, DISTRIBUTORS 
& MANUFACTURERS FIND THAT USING  KWIK-SEALS ROOF FASTENER COVERS & SEAM TAPE

SAVES MONEY BY REDUCING LABOR COST & ELIMINATING DRYING TIME. 
THIS KWIK-SEAL METHOD OF SEALING LEAKS ALSO CREATES A PROFESSIONAL AND CONSISTENT APPEARANCE, ELIMINATING TEDIOUS CAULKING  AND TIME-CONSUMING EMBEDDING OF FABRIC SEALANTS.

KWIK-SEAL a self-adhering disk, conforms around individual fasteners, creating a water tight seal. 

FASTENER COVERS AND/OR SEAM TAPE ARE BEING USED BY MOST LEADING COATING MANUFACTURERS!

The  major cause of metal roof  leaks is fastener movement. Thermal shock is the culprit causing fasteners to loosen & back out. Panels expand and contract from temperature change, causing, holes to elongate and loosen. Metal panels lift allowing moisture to travel along the panel edge causing leaks that appear far from their source, and are very hard to locate. Before Kwik-Seals, daubing, gooping & painting fasteners resulted in an unsatisfactory seal and an unsightly roof appearance. Kwik-Seals not only eliminate all these problems, they are easy to apply and will last the life of the roof. The Kwik-Seal tool conforms the seal around the fastener head creating a water tight seal and secures it tightly to the roof surface, eliminating leaks and screw movement. Over size fasteners are no longer needed due to elongated holes.Simply remove the loose fastener and seal the hole with a Kwik-Seal. This same fastener may now be installed next to it's original position and Sealed for protection. KWIK-SEALS  a self-adhering disc, conforms around individual fasteners, creating a tight waterproof seal. 


KWIK-SEALS  requires no drying time, eliminating the problems of caulking, gooping and patching. 






​​FEATURES: 
• Covers and seals elongated holes caused by contraction and expansion
• Prevents fastener backout, the major cause of roof leaks
• Stops metal roof leaks, rust and screw movement
• Reduces fastener replacement
• Prevents UV weathering of neoprene washers
• Creates a consistent fastener appearance
• Eliminates drying  time 
• Stays flexible
• Butyl Adhesive  free of asphalt & solvents
• No harmful VOC's
• Just the right thickness Adhesive/Sealant
• Pressure sensitive
• Excellent for sealing fasteners & seams before coating roof
• Save one day drying time in addition to cost savings


Note: We recommend coating all seals with an acrylic elastomeric paint. Available from most paint stores.
We have found that birds an creatures like to chew and pick on shiny surfaces. The other issue we have experienced is snow is slowing wearing down the aluminum surface over time.


STOP METAL ROOF LEAKS!

"FIX IT AND FORGET IT!"

LEAK STOPPER

ORDER BY PHONE: 

281-399-9334

METAL ROOF SEALS