281-399-9334

ORDER BY PHONE: 

METAL ROOF SEALS

TECHNICAL DATA


"FIX IT AND FORGET IT!"

Poly Seals

Poly Kwik Seals & Tape Is a self-adhering material featuring DuPont Sontara* fabric which is made of wood pulp & spun polyester and a highly aggressive water resistant butyl rubber adhesive. This woven fabric is excellent at absorbing coatings and is the preferred method for coating manufactures  The 20 mils of butyl prevents water from penetrating and seals tightly to most any surface. This material must be coated after application.


APPLICATION:

Peel off release paper backing, pinch Seal in half to determine center, center on fastener head, flatten to original shape, center tool, push down hard, then twist.
Presto! A customized Seal Ready to Coat.
Bonding Time Immedite Water tight Agrssive grip Full Bond 24 hours.
Thickness 20 mils+/5mils.
Tensile Strength 475 psi ( with 60% elongation) ( adhesive/sealent).
Peel Strength 10 Lbsper lineal inch (adhesive).
Fluid Absorbtion Excellent for coatings. Fabric of wood pulp & polyester.
U.V. Resistance Avoid direct U. V. Exposure.
 

LEAK STOPPER

Aluminum Kwik Seals Is a self-adhering material featuring a heavy duty protected  Aluminum Polyethylene Mesh reinforced foil film surface and a highly aggressive water resistant butyl rubber adhesive. This tough film surface provides a puncture and UV resistant surface. The 20 mils of butyl prevents water from penetrating and seals tightly to most any surface.


APPLICATION:

Peel off release paper backing, pinch Seal in half to determine center, center on fastener head, flatten to original shape, center tool, push down hard, then twist.
Presto! A customized water tight fastener Seal! 


Physical Properties

Thickness 20 mils +-/5mils
Tensile ASTMD412 (Psi) 75.0
Elongation ASTMD412 % 60.0
Permeance ASTM E283-83 Cfm/ft2 0.01
Puncture Resistance ASTM E164 Lbs 125.0
Low Temp Flexibility ASTM D 1870 0F. Unaffected at -60 degrees F
Crack Cycling (100) cycles ASTM C836 OF. Unaffected at -50 degrees F
Peal Strength ASTMD903 Lb/in. Width 17
Lap Adhesion ASTM D 1876 Mod. Lb/in width 7.0
Water Absorption ASTM D 570 % by weight 1.0 (max)
Hydrostatic Head ASTM D 5385 Ft. 231 (min)
Shelf Life 18 to 24 months


Facing Properties
Aluminum with polyethylene Mesh
Basis Weight 8.8 lbs/1000 square feet
Permeance VWTR ASTM EE86A 0.02 perm
Bursting Strength ASTM D774 65psi
Beach Puncture ASTM D781 550 Beach Units
Tensile Strength ASTM D828 23 lbs in. (MD) 24 lbs. In. (XD) Low Temp . Resistance ASTM D1790/40 f Flexible/no delimitation High Temp. Resistance ASTM D 1790/+280f Flexible/no Delam
Water Immersion 24 hours 73 f No delamination
Mold resistance ASTM C665 No Growth
Foil emissivity ASTM E408  0-03